Starting service adaptor management¶
This section explains the procedures for registration so that you can get started with service adaptor management.
We assume that you already have completed creating the service agreement. Also prepare your partner account (login ID for the admin control panel) as you will need it during this process.
Getting starting with service adaptor management¶
To begin service adaptor management, you must use the admin Control Panel to register the service adaptor’s Distribution ID for the SA code.
Note
SACM uses SA codes to manage storage domains used to store configuration, status, etc. information for each service adaptor. By managing the status of how each unique service adaptor Distribution ID is registered with or switched between SA codes, you can conduct operations remotely and transfer configurations (equipment exchange).
Service adaptor registration procedure¶
Confirm the Distribution ID of the service adaptor¶
The Distribution ID is issued by the service adaptor vendor. How the ID is provided will differ with each device so contact your service adaptor vendor for details. (With some equipment, the Distribution ID can be confirmed via the printing on the package or label, or through the service adaptor user interface)
Distribution ID example:
0001-0000-0000-000B-02E0-4DFF-FE10-0128
32 digits hexadecimal
Register the Distribution ID in the SA code¶
Login to the admin Control Panel to conduct the registration process.
Login to the admin Control Panel
Use your partner account for the login ID.
The admin Control Panel URL will differ for each OEM.
Open the “Servicelist” tab and select the Management label that you want to manage
Open the “Setting” tab and register the Distribution ID with the SA Code.
The Management label and SA label text may be chosen freely.
After input, click the Update button to confirm the change.
This completes the registration procedure for the service adaptor.
Once registration is complete, the service adaptor boots and a boot notification is sent to the RS, after which the Connection status display in the “Dashboard” tab is updated.
Related information¶
Using the ‘SEIL/x86’ as an SMF service adaptor.