SACM can send the following types of operations to the service adaptor.
ping
A ping command is executed on a specified address from the service adaptor.
traceroute
A traceroute command is executed on a specified address from the service adaptor.
Read strage
Directly reads the config information stored in the actual service adaptor. You can specify either “service adaptor running config” or service adaptor backup config.”
Reboot
Reboots the service adaptor.
Read status
Reads the current status of each module from the service adaptor.
Clear status
Clears the status of each module.
Md command
Executes desired commands on each module.
A “Task” is generated for each executed operation. You can view task content to confirm the execution status and execution results. You also can “Cancel” or “Modify execution date and time” for tasks if the operation was executed using the “Execute by designating date and time” function and the status is “waiting to execute.” A task also is generated when you reflect immediately or designate a reflect schedule to execute a reflect config.